CARBON STEEL PIPE FITTINGS

Reducers be applied, to change from pipe diameter in one direction. Standard there are 2 possibilities, the concentric reducer, is usually used in vertical pipe lines, and the eccentric reducer that is used in horizontal pipe lines.Reducer concentric and ECCENTRIC

we Punya Steel company, Are Leading Manufacturer of Butt Weld Long And Short Stub End, Butt Weld Long Stub End, Butt Weld Short Stub End,Stainless steel Butt weld Stub End Stainless steel 304 Butt weld Stub End Stainless steel 304L Butt weld Stub End Stainless steel 316 Butt weld Stub End Stainless steel 316L Butt weld Stub End Stainless steel 321Butt weld Stub End

Stainless Steel U Bends are used to reverse the direction of piping in piping systems. In cooling systems and heating systems the pipes often go up and down in direction. To make these structures, the bends are extremely useful. The U Pipe bend Manufacturer in india could be short or long, and the material grades can differ. The U Bend Pipe Fitting varies in diameter with the applications. The most used range is ½ inches through 48 inches in diameter which is the ASME B16.9 standard.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications. ... We supply carbon steel elbows of different standards(ASTM, ASME, NACE, MSS).

Long Radius (LR) Elbow is also called LR elbow – means the radius is 1.5 times the pipe diameter. L/R 45°Elbow: Long radius 45 degree elbow changes the direction by 45 degrees. L/R 90°Elbow: Long radius 90 degree elbow changes the direction by 90 degrees.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications. ... We supply carbon steel elbows of different standards(ASTM, ASME, NACE, MSS).

Carbon Steel Reducing Tee (Reducer Tee)Reducing tee (Reducer Tee): The branch diameter is smaller than main diameter. The reducing tee is usually described as NPS diameters in 4” x 4” x 3”, where 4” is the main line pipe diameter, and 3” is the reducing branch

Usage Industrial Size 1/8 inch Size/Dimension 1/2" to 48"Material Butt Weld Brand Stainless Steel Color Silver Thickness 6.35mm Usage/Application Structure Pipe Grades Stainless Steel Standards ASME B16.9 I Deal In New Only Connection Type Butt Weld Wall Thickness Sch.5S to Sch XXS

Connection Female Elbow Bend Angle 45 Degree Application Oil Material Stainless Steel Head Code Round Technics Casting

Standards: ASTM B366 UNS N02200 Brand: Indian Steel Company Material: Stainless Steel Usage/Application: Structure Pipe Connection: Welded Finishing: Polished